Product Data Sheet

NOCOCOOL EP SUPER
 
 

NOCOCOOL EP Super is a heavy duty oil-free synthetic cutting and grinding fluid concentrate designed to offer outstanding EP performance as well as excellent corrosion control on machinery and workpieces while providing a long sump life.

NOCOCOOL EP Super may be used on a variety of metals, including steels, cast iron and aluminum; in operations ranging from grinding to turning to milling.
 
 

NOCOCOOL EP Super has been designed for machining most metals except magnesium. Excellent on cast iron. This product may also be used for grinding; blanchard, diamond wheel, centerless, belt, disk, etc.

Note:  Since this product is completely oil-free, it may be used in most coolant mist units for machining and grinding operations.
 
 

• Superior EP lubrication
• Nitrite-Free
• Chlorine-Free
• Phenol-Free
• Excellent Performance on Cast Iron, Malleable Iron, Nodular Iron and Steels
• Excellent Corrosion Inhibition
• Long Tank Life
• Excellent Cooling for Ability to Maintain Close Tolerances
• Tolerant of Hard Water
• Resistant to Damage from Tramp Oil
• Water Extendable-Economical

 

PROPERTIES
Appearance - Concentrate	Blue Liquid, Slight Haze
Appearance - Dilution	Transparent Blue Liquid
Odor	Bland
Residual Film	Soft, Soluble
pH:	9.5 ± 0.3
Specific Gravity @ 60° F	1.03 ± 0.01
Lbs./Gal.	8.6 ± 0.1
Flash Point, PMCC, ° F	None

 

CONCENTRATION

NOCOCOOL EP Super

Concentration	3% (1:33)	4% (1:25)	5% (1:20)	7% (1:14)	10% (1:10)
BRIX Reading	1.0	1.3	1.6	2.2	3.2

An optical refractometer may be used for determining concentration.

 
 
 
 

RECOMMENDED STARTING DILUTIONS
Milling, Drilling, Turning	10:1 / 20:1 (5%)
Centerless, ID, OD, Surface Grinding	30:1
Misting Applications	30:1 / 40:1 (2.5%)

 

All reasonable care has been taken to ensure that the above information is accurate as of the date of printing.

NOCO Energy Corp.
Tonawanda, NY  14150
(800) 500-6626

rev. 06/01/2008