Product Data Sheet

NOCO Biocool 105 EP
 
 

BIOSTABLE SEMI-SYNTHETIC CUTTING AND GRINDING FLUID

NOCO Biocool 105 EP is a semi-synthetic BIOSTABLE general purpose metalworking coolant containing approximately 20% mineral Oil. This product, when diluted with water, forms a translucent amber emulsion which offers excellent workpiece visibility, good lubricity, and superior cooling.

NOCO Biocool 105 EP is designed for the machining and grinding of virtually all metals, except magnesium, and contains chlorine as an extreme pressure additive for greater lubricity.
 
 

BIOSTABILITY

Biostability refers to the ability of a metalworking coolant to resist extreme biological degradation. This provides extremely long sump life in a properly maintained machine tool and diminishes the possibility of "Monday Morning Odor".

 
 
ADVANTAGES
  • Eliminates Need for Tankside Additives
  • Low Foaming
  • Mild, Pleasant Odor
  • Excellent Corrosion Inhibition
  • Excellent Hard Water Stability
  • Good Workpiece Visibility-Translucent
  • Superior Tramp Oil Rejection
  • Operator Friendly
  • Excellent Lubricity
  • Clean Running
  • Provides Excellent Finish
  • Long Lasting

APPLICATIONS

Designed for use in metalworking applications such as all CNC milling, turning, drilling, tapping, and grinding.  NOCO Biocool 105 EP is also excellent on conventional machining processes and sawing applications.
 

 
PROPERTIES
   
Appearance - Concentrate Amber Liquid
Appearance - Dilution Transparent Amber
Odor Bland
Residual Film Soft, Fluid
pH @ 20:1  (5%): 9.0 ± 0.2
Specific Gravity @ 60° F 1.0 ± 0.01
Lbs./Gal.  8.33 ± 0.1
Total Chlorine, wt % 1.0
Flash Point, PMCC, ° F None

 

CONCENTRATION

NOCO Biocool 105 EP

Concentration 4%
(1:25)		 5%
(1:20)		 6%
(1:17)		 7%
(1:14)		 8%
(1:12)		 9%
(1:11)		 10%
(1:10)
Refractometer Reading 2.2 2.8 3.4 3.9 4.5 5.0 5.6
An optical refractometer may be used for determining concentration.



 
 
 
 
 

RECOMMENDED STARTING DILUTIONS
   
Centerless, ID, OD, Surface Grinding 25:1  (4%)
Milling, Drilling, Turning 20:1  (5%)
Tapping, Reaming, Sawing 10:1  (10%)

 

All reasonable care has been taken to ensure that the above information is accurate as of the date of printing.

NOCO Energy Corp.
Tonawanda, NY  14150
(800) 500-6626

rev. 06/01/2008