Product Data Sheet

NOCO FORM COMPOUNDS
 

NOCO FORM COMPOUNDS are highly active release agents specifically designed for concrete forms commonly used in modern construction and precast industries.  They are mineral oil-based products compounded with a variety of job-proven release additives to give the following benefits:

• Easier stripping of forms -- less sticking than with straight oils or reclaimed oils.
• Smooth, stain-free-surfaces -- the clean, non-glossy surfaces are generally receptive to paint, epoxy and other coatings.
• Wide range of applications -- may be used on steel, aluminum, plywood and epoxy coated plywood forms.
• Longer form life -- no chipping or scrapping is needed to remove concrete from forms.
• Rust prevention -- NOCO FORM COMPOUNDS help prevent rust formation on metal forms, hoppers and shovels.
• N.Y. State D.O.T. Approved.

NOCO FORM COMPOUNDS are available in the following grades:
 

NOCO Form Compounds LV Specification	Code #NOC053001
ASTM Method Specification Minimum Maximum Typical D-1298A Gravity, API@60°F 33.0 D-445 Viscosity@40°C, cSt 20.5 21.5 D-445 Viscosity@100°C, cSt 4.2 D-2270 Vicosity Index 105.0 D-1500 Color 1.0 D-5949 Pour Point °C -24 D-92 Flash Point °F 350
NOCO Form Compounds 6 Specification	Code #NOC052408
ASTM Method Specification Minimum Maximum Typical D-1298A Gravity, API@60°F 33.7 D-445 Viscosity@40°C, cSt 7.1 8.1 D-445 Viscosity@100°C, cSt 22 D-2270 Vicosity Index < 100 D-1500 Color 1 D-5949 Pour Point °C -39 D-92 Flash Point °F 235

Don't Pollute!  Dispose of used oil properly!
Call your NOCO sales representative for details on our Oil Recovery Program. All reasonable care has been taken to ensure that the above information is accurate as of the date of printing.

NOCO Energy Corp.
Tonawanda, NY  14150
(800) 500-6626

rev. 06/01/2008