Product Data Sheet

NOCOCUT 462

NOCO Lubricants has developed this quality cutting oil for those tough to machine operations. NOCOCUT 462 was specifically designed as a superior heavy-duty cutting oil primarily for use on ferrous metals. This product contains both active and non-active polymeric additives and lubricity agents that are required for difficult to machine metals. This combination of chemistries provides outstanding performance and superior finish in the most difficult operations.

NOCOCUT 462 is recommended for threading, tapping, turning, gear cutting / hobbing, milling and forming operations. Its low viscosity improves the ability to flush swarf and chips away from the tool and allow fines to settle rapidly in the machine sump. Operators will enjoy working with NOCOCUT 462 because of its low odor, transparent and light color.

 

TYPICAL PHYSICAL CHARACTERISTICS
Appearance	Light amber
Density	0.8854
Viscosity @ 40°C, cSt	30.5
Viscosity @ 100°F, SUS	148
Copper Strip	4b
Flash Pt, °C.	170
Active Sulfur	Not Present
Chlorine % wt	Not Present

 

Features

Benefits

Low Viscosity Light colour Low odour New additive technology Safe to use High viscosity index

Rapidly flushes chips and swarf away from tool point Easier to see tool and workpiece Easier to clean parts Immediate operator acceptance Improves shop environment Improve tool life Higher production rate Improves surface finish Improves quality of parts Improves cooling ability - reduces tool wear Non irritating to normal skin Good flow characteristics at low temperatures Provides excellent film strength at higher temperatures

Don't Pollute!  Dispose of used oil properly!
Call your NOCO sales representative for details on our Oil Recovery Program.

All reasonable care has been taken to ensure that the above information is accurate as of the date of printing.

NOCO Energy Corp.
Tonawanda, NY  14150
(800) 500-6626

rev. 06/01/2008