Product Data Sheet

NOCOCUT GDO
 

NOCO Lubricants has developed a new series of environmentally friendly gun drilling oil incorporating advanced polymeric additives.

NOCOCUT GDO  was developed specifically as a heavy duty gun or deep hole drilling oil. This oil contains both active and non active polymeric additives and lubricity agents that are required for difficult to machine metals.  This combination of new chemistry provides outstanding performance and superior finish on  these difficult to machine metals.

NOCOCUT GDO is recommended for deep hole and gun drilling where its low viscosity improves the ability to flush swarf and chips away from the hole and allow fines to settle rapidly.

Operators will enjoy working with NOCOCUT GDO because its low order, transparent, very light color properties.
 

 

TYPICAL PROPERTIES
Appearance	Light Pale
Color ASTM D-1500	1.0
Density	.8730
Viscosity @ 40ºC cSt	14.5
Viscosity @ 100° F SUS	75.4
Copper Strip Test	4b
Pour Point, ºF	5º
Flash Point, °F COC	350º
Viscosity Index	98

 
 

Features	Benefits
Low Viscosity	Rapidly flushes chips and swarf away from hole
Light color	Easier to see tool and workpiece Easier to clean parts
Low odor	Immediate operator acceptance Improves shop environment
Non chlorine EP additive	Improves corrosion protection Environmentally friendly Reduces disposal cost
New additive technology	Improve tool life Higher production rate Improves surface finish Improves quality of parts Improves cooling ability - reduces tool wear
Anti-Misting	Safer to use Improves plant cleanliness
Safe to use	Non irritating to normal skin
High viscosity index	Good flow characteristics at low temperature Provides excellent film strength at higher temperatures

Don't Pollute!  Dispose of used oil properly!
Call your NOCO sales representative for details on our Oil Recovery Program.

All reasonable care has been taken to ensure that the above information is accurate as of the date of printing.

NOCO Energy Corp.
Tonawanda, NY  14150
(800) 500-6626

rev.06/01/2008