Product Data Sheet

NOCO SUPREME GEO SAE 40

NOCO Supreme GEO SAE 40 is a premium performance lubricant formulated with advanced additive technology and superior high quality Group II base oils to provide the ultimate in protection for turbocharged, naturally aspirated, medium and high speed, four-cylce gas engines requiring a low ash oil.  The additive system utilized in NOCO Supreme GEO SAE 40 has been performance proven under severe service, high demand/load,  high output conditions such as 'lean burn' and stoichiometric four-cycle engines in co-generation and gas compression applications.  The low ash, low phosphorous formula provides exceptional anti-wear protection to valve-train components, gears, bearings, pistons and rings while insuring catalytic converter compatibility and longevity.

Performance Advantages

This premium Group II base oil/ selective additive combination provide:

  • Superior resistance to oxidation, nitration and oil thickening even under the most severe operating conditions
  • Maximum oil life resulting in the potential for extended drain intervals, reduction in maintenance and operating costs, less waste oil generation and reduced oil usage
  • Lower oil volatility to reduce oil consumption and minimize combustion chamber and exhaust system deposits
  • Enhanced anti-wear protection in a low phosphorous formulation
  • Low impact, lower volatility phosphorous resulting in reduced exhaust catalyst degradation
  • Advanced detergent/dispersant performance and excellent Base Number retention to insure ultimate engine cleanliness and reduce sludge and varnish formation, even with extended oil drain intervals.

Applications

NOCO Supreme GEO SAE 40 is designed for use in a wide variety of medium and high-speed, four-cycle gas engines requiring the use of a low ash oil,  including those manufactured by caterpillar, Cummins, Jenbacher, Waukesha, Deutz, Wartsila and others.  Always follow equipment manufacturer's recommendations for appropriate product quality, application and viscosity selection.

Typical Physical Characteristics

SAE Grade

  

40

Density, lbs/gal

Calculated

7.3

Gravity, 60ºF API

ASTM D-1298A

29.9

     

Flash, COC ºF (ºC)

ASTM D-92

500 (260)

Pour Point, ºF (ºC)

ASTM D-5949

-27 (-33)

Viscosity Index

ASTM D-2270

102

cSt @ 40°C

ASTM D-445

119.8

cSt @ 100°C

ASTM D-445

13.0

Color

ASTM D-1500

2.5

TBN

ASTM D-2896

                6.0

Sulfated Ash, mass %

ASTM D-874

0.58

     

Don't Pollute!  Dispose of used oil properly!
Call your NOCO sales representative for details on our Oil Recovery Program.

All reasonable care has been taken to ensure that the above information is accurate as of the date of printing.

NOCO Energy Corp.
Tonawanda, NY  14150
(800) 500-6626

rev.11/15/2010