Material Identification and Use
Manufacturer's Name | NOCO Energy Corp. |
Manufacturer's Address | 2440 Sheridan Dr., Tonawanda, NY 14150 |
Emergency Phone Number | 1-800-424-9300 (Chemtrec) |
Supplier's Address | P.O. Box 86, Tonawanda, NY 14151 |
Supplier Emergency Phone Number | 1-800-500-6626 |
Product Name | Base Stock Pale Series |
Product Code | NOC040CP - 40 Pale NOC060CP - 60 Pale NOC100CP - 100 Pale NOC150CP - 150 Pale NOC200CP - 200 Pale NOC300CP - 300 Pale NOC500CP - 500 Pale NOC750CP - 750 Pale NOC800CP - 800 Pale NOC850CP - 850 Pale NOC2000CP - 2000 Pale NOC2400CP - 2400 Pale NOC8595CP - 8595-2 Pale |
Chemical Name and Synonym | Petroleum Hydrocarbon |
Product Use | This product is intended for use as a lubricant or for use in engineered processes. |
Ingredients
Components | Percentage | CAS Number | Hazard Data |
Hydrotreated Light and Heavy Naphthenic Distillates | 0 - 100 | 64742-52-5 64742-53-6 |
OSHA PEL/TWA 5mg/m3 (mist) ACGIH STEL/TWA 10mg/m3 (mist) ACGIH TLV/TWA 5mg/m3 (mist) |
WHMIS Classification | Not Controlled |
Physical Data
Physical State | Liquid |
Odour and Appearance | Very light to very dark pale with slight iridescence and typical light oily odor. |
Specific Gravity | .89 - .9660 |
Vapor Pressure (MM HG @ 20° C) | < 0.1 |
Vapour Density | > 1.0 |
Evaporation Rate | Not Established |
Boiling Point | > 315°C (599°F) |
Freezing Point | Not Determined |
pH | N/A |
Solubility in H20 | NIL |
Fire and Explosion Hazards
Conditions of Flammability | Addition of water or foam may cause frothing. Do not cut, drill or weld empty containers. |
Extinguishing Media | Foam, Water Fog, Dry Chemical, Carbon Dioxide. |
Flashpoint and Method of Determination | 230°F (110°C) min.; COC |
Flammable Limits in Air % B. V. Upper | Not Determined |
Flammable Limits in Air % B. V. Lower | Not Determined |
NFPA - Hazard Class | Health:1 Fire:1 Reactivity:0 |
Hazardous Combustion Products | Oxides of Carbon and Sulfur |
Unusual Fire an Explosion Hazard | Container exposed to intense heat from fires should be cooled with water to prevent vapor pressure build up which could result in container rupture. Container areas exposed to direct flame contact should be cooled with large quantities of water as needed to prevent weakening of container structure. |
Special Fire Fighting Procedures | Wear self contained breathing apparatus when fire fighting in a confined space. Cool fire exposed containers with water spray. |
Reactivity Data
Chemical Stability | Stable |
Incompatible Materials | Strong oxidizing agents: Peroxides, Chlorine, Strong Acids, etc. |
Hazardous Decomposition | Oxides of sulfur and carbon.. |
Hazardous Polymerization | Material is not known to polymerize. |
Health Hazard Information
Routes of Entry | |
Skin Contact | Prolonged or repeated contact with skin may cause mild irritation and possibly dermatitis. |
Eye | Mildly irritating to eyes. |
Inhalation | If heated, sprayed or misted, may cause chemical pneumontis. |
Ingestion | Low toxicity on ingestion. Has laxative effect. |
Carcinogenicity | Not listed as a carcinogenic. |
Emergency and First Aid Procedures
Eyes | In case of contact, flush eyes with large amounts of water for at least 15 minutes. Get medical attention. |
Skin | Wash skin thoroughly with soap and water or waterless hand cleaner. If irritation occurs, get medical attention. |
Inhalation | If breathing is difficult, remove victim to fresh air, give artificial respiration if not breathing. |
Ingestion | Do not ingest. If ingested, do not induce vomiting. Get medical attention. |
Preventative Measures
Ventilation Requirements | Use explosion proof ventilation as required to control vapor concentration. |
Respiratory Protection | Not required under normal OSHA PEL. Use NIOSH approved respirators to prevent over-exposure. |
Eye Protection | Safety glasses with side shields or goggles. |
Protective Gloves | Nitrile gloves provide best protection to hands and arms. |
Personal Hygiene | Wear effective plant clothing. Contaminated clothing should be removed and washed in soap and water. Cleanse skin thoroughly before meals with soap and water. Shower and eyewash facilities should be accessible. |
Note | N/A |
Environmental Procedures
Spills or Releases | If material is spilled or released to the atmosphere, steps should be taken to prevent discharges to streams or sewer systems. Spills or releases should be reported, if required to the appropriate local, state and federal regulatory agencies. |
Disposal | Clean up action should be carefully planned and executed. Shipment, storage and/or disposal of waste materials are regulated and action to handle or dispose of spilled or released materials must meet all state, local, and federal rules. |
Storage | Protect against physical damage. Separate from oxidizing materials. Store in cool well ventilated area of non-combustible construction away from possible sources of ignition. |
Regulatory Information
Dept. of Transportation | DOT Shipping Name: NONE Hazard Class: NONE ID Number: NONE |
TSCA | All Components are Listed on EPA/TSCA Inventory. |
CERCLA | This product is classified as an oil under section 311. Spills into or leading to surface water that cause sheen must be reported to the National Response Center at 1-800-424-8802. |
RCRA | If this product becomes a waste it would not be a hazardous waste by RCRA - 40 CFR 261. Place in an appropriate disposal facility in compliance with local authorities. |
SARA Title III - Section 302 | Not Applicable |
Section 311/312 | Not Applicable |
Section 313 | Not Applicable |
Preparation Date of Material Safety Data Sheet
Prepared By | NOCO - Tom Goodnight |
Phone number of Preparer | 1-800-500-6626 |
Date Prepared | 06/29/2000 |
Revised Date | 07/30/2013 |
Disclaimer
Information presented herein has been compiled from information provided to us by our suppliers and other sources considered to be dependable and is accurate and reliable to the best of our knowledge. Nothing herein is to be construed as recommending any practice or the use of any product in violation of any patent or in violation of any law or regulation. It is the users' responsibility to determine the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. We make no warranty as to the results to be obtained in using any material and since conditions of use are not under our control, we must necessarily disclaim all liability with respect to the use of any material supplied by us. |