Material Safety Data Sheet

FORM COMPOUND LW


Material Identification and Use


Manufacturer's Name NOCO Energy Corp.
Manufacturer's Address 2440 Sheridan Dr., Tonawanda, NY 14150 (U.S. and Canada)
Emergency Phone Number 1-800-424-9300 (Chemtrec)
Supplier's Address P.O. Box 86, Tonawanda, NY  14151
Supplier Emergency Phone Number 1-800-500-6626
Product Name FORM COMPOUND LW
Product Code NOC0518 
Chemical Name and Synonym Petroleum Hydrocarbon plus Additives
Product Use Concrete Form Releasant

Chemical Ingredients


Product Components CAS Number
% (Volume)



Solvent Refined Light Paraffinic Distillate 64741-89-5
85 - 95
Additives Mixture
5 - 10
     
WHMIS Classification B3, D2A, D2B  

Physical Properties


Form Liquid
Appearance Fluid
Odor Bland
Color Light Amber
Specific Gravity (water=1) ..87
Boiling Point > 330°C  (625°F)
Melting Point < -40°C (-40°F)
Solubility in Water (by weight %) 0 at 20°C
Evaporation Rate Not Determined
Vapor Pressure (mm Hg at 20° C)
Vapor Density (air = 1) Not Volatile
pH (as is) Not Applicable
Stability Product is stable under normal conditions
Viscosity SUS at 100°F < 100

Fire and Explosion Hazards


Conditions of Flammability Open flames, sparks. Do not cut, weld, solder, drill, grind, or expose containers, drums, tanks, etc. of product to heat, flame, sparks, static electricity or other sources of ignition; they may ignite explosively.
Extinguishing Media Mechanical Foam, Alcohol Foam, Dry Chemical Powder, Carbon Dioxide or water as fog only.
Flashpoint and Method of Determination 170°F  (77°C) ,  TCC
Flammable Limits in Air % B. V. Upper Not Determined
Flammable Limits in Air % B. V. Lower Not Determined
NFPA - Hazard Class Health:0  Fire:1  Reactivity:0
Hazardous Combustion Products Oxides of Carbon
Unusual Fire an Explosion Hazard Combustible Flash 100°F to 200°F 
Special Fire Fighting Procedures Use water spray to cool tank/container. Wear self contained breathing apparatus when fire fighting in a confined space.

Reactivity Data


Chemical Stability Stable
Incompatible Materials Keep away from strong oxidizing agents, such as, hydrogen peroxide, Bromine, chlorine and chromic acid.
Hazardous Decomposition Carbon monoxide and carbon dioxide from burning.
Hazardous Polymerization Material is not known to polymerize.

Health Hazard Information


Routes of Entry
Skin Contact Prolonged or repeated contact with skin may cause mild irritation and possibly dermatitis.
Eye Mildly irritating to eyes.
Inhalation If heated, sprayed or misted, may cause chemical pneumontis.
Ingestion Low toxicity on ingestion. Has laxative effect.
Carcinogenicity Not listed as a carcinogenic.
Health Hazard Data

Permissible Concentrations (air): See COMMENTS section
Chronic effects of overexposure: no data available
Acute toxicological properties: no data available


Emergency and First Aid Procedures


Eyes In case of contact, flush eyes with large amounts of water for at least 15 minutes. Get medical attention.
Skin Remove excess with cloth or paper. Wash skin thoroughly with soap and water or waterless hand cleaner. If irritation occurs, get medical attention.
Inhalation If breathing is difficult, remove victim to fresh air, give artificial respiration if not breathing. Call a physician.
Ingestion Do not ingest. If ingested, do not induce vomiting. Contact a physician immediately.

Special Protection / Preventative Measures Information


Ventilation Requirements Use explosion proof ventilation as required to control vapor concentration. See COMMENTS section.
Respiratory Protection If vapor concentration exceeds permissible exposure use NIOSH / MSHA certified respirator with dual organic vapor, mist and particulates cartridge.
Eye Protection Safety glasses with side shields or goggles. (Chemical safety goggles)
Protective Gloves Neoprene Type
Personal Hygiene Wear effective plant clothing. Contaminated clothing should be removed and washed in soap and water. Cleanse skin thoroughly before meals with soap and water. Shower and eyewash facilities should be accessible.
Protective Equipment None
Note N/A

Environmental Procedures


Spills or Releases If material is spilled or released to the atmosphere, steps should be taken to prevent discharges to streams or sewer systems.  Transfer bulk of mixture into another container. Absorb residue with inert material such as earth, sand, or vermiculate. Sweep up and dispose as solid waste in accordance with local, state, and federal regulations. Spills or releases should be reported, if required to the appropriate local, state and federal regulatory agencies.
Disposal Clean up action should be carefully planned and executed. Shipment, storage and/or disposal of waste materials are regulated and action to handle or dispose of spilled or released materials must meet all state, local, and federal rules.
Storage Protect against physical damage. Separate from oxidizing materials. Store in cool well ventilated area of non-combustible construction away from possible sources of ignition. Do not handle or store at temperatures over (maximum storage temperature) 60°C (140°F)

Regulatory Information


Dept. of Transportation

DOT Shipping Name:  NONE 
Hazard Class:  NONE 
ID Number:  NONE
Special Transportation Notes - NONE

TSCA All Components are Listed on EPA/TSCA Inventory.
CERCLA This product is classified as an oil under section 311.  Spills into or leading to surface water that cause sheen must be reported to the National Response Center at 1-800-424-8802.
RCRA If this product becomes a waste it would not be a hazardous waste by RCRA - 40  CFR 261.  Place in an appropriate disposal facility in compliance with local authorities.
SARA Title III - Section 302 Not Applicable
Section 311/312 Not Applicable
Section 313

This product contains the following toxic chemical category(ies) subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372 (percent by weight is also provided):.

Reportable Quantity 1.4% zinc compound or 0.14% zinc in compound form
Freight Classification Petroleum Lubricating Oil

Comments


If used in applications where a mist may be generated, observe a TWA/PEL of 5 mg/m3 for mineral oil mist (OSHA and ACGIH).

All components of this product are on the US TSCA Inventory and Canadian Domestic Substance List.

The additive manufacturers have declared the additive mixtures in this product a trade secret.



Preparation Date of Material Safety Data Sheet


Prepared By Tom Scoda (585) 924-4130
Phone number of Preparer 1-800-229-6626
Date Prepared 04/18/2005
Revised Date 06/18/2012

Disclaimer


We believe the statements, technical information and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for an loss, damage, or expense, direct or consequential, arising out of their use.