Material Safety Data Sheet


Material Identification and Use

Manufacturer's Name NOCO Energy Corp.
Manufacturer's Address 2440 Sheridan Dr., Tonawanda, NY 14150 (U.S. and Canada)
Emergency Phone Number 1-800-424-9300 (Chemtrec)
Supplier's Address P.O. Box 86, Tonawanda, NY  14151
Supplier Emergency Phone Number 1-800-500-6626
Product Name NOCO Draw 1023
Product Code NOC1715
Chemical Name and Synonym N/A
Product Use This product is intended to be used as received in metalworking applications.


Components % CAS # Hazard Data

Hydrotreated / Hydrocracked Paraffinic
Distillate Mixture
40 - 60 64742-62-7 OSHA PEL/TWA 5mg/m3 (mist)
ACGIH TLV/TWA 5mg/m3 (mist)
ACHIH STEL/TWA 10mg/m3 (mist)
Paraffin Waxes and Hydrocarbon Waxes, chlorine 30 - 40 Proprietary  
Fatty Oils and Triglycerides 5 - 10
Proprietary Additive 0.5 - 1.0 Proprietary  
Blue Dye < 0.1 Blend  
WHMIS Classification     D2B

Physical Data

Physical State Liquid
Odour and Appearance Transparent Blue Liquid, Bland Hydrocarbon Odor
Specific Gravity 1.03
Vapor Pressure (MM HG @ 20° C) Not Determined
Vapour Density Not Determined
Evaporation Rate Not Established
Boiling Point 315°C  (600°F)
Freezing Point Not Determined
pH N/A
Solubility in H20 Not Soluble
Viscosity @ 40°C 32 cSt

Fire and Explosion Hazards

Conditions of Flammability Addition of water or foam may cause frothing. Do not cut, drill or weld empty containers.
Extinguishing Media Foam, Water Fog, Dry Chemical, Carbon Dioxide.
Flashpoint and Method of Determination 210°C  (410°F) ,  COC
Flammable Limits in Air % B. V. Upper Not Determined
Flammable Limits in Air % B. V. Lower Not Determined
NFPA - Hazard Class Health:1  Fire:1  Reactivity:0
Hazardous Combustion Products Oxides of carbon, nitrogen and hydrogen chloride.
Unusual Fire an Explosion Hazard Remove all individuals from area who are not properly trained in fire fighting. The toxic characteristics of ignition by-products require the use of full bunker gear (including self contained breathing apparatus) when fighting a fire involving this product.
Special Fire Fighting Procedures Use water fog, dry chemical, foam or carbon dioxide. Water fog should be used to keep fire exposed containers cool. Do not point solid water stream directly into burning oil to avoid spreading. Large amounts of hydrogen chloride gas can evolve at elevated tempertures.

Reactivity Data

Chemical Stability Stable
Incompatible Materials Strong oxidizing agents:  Peroxides, Chlorine, Strong Acids, etc. 
Hazardous Decomposition Oxides of Carbon, nitrogen and hydrogen chloride.
Hazardous Polymerization Material is not known to polymerize.

Health Hazard Information

Routes of Entry
Skin Contact Prolonged or repeated contact with skin may cause mild irritation and possibly dermatitis.
Eye Mildly irritating to eyes.
Inhalation If heated, sprayed or misted, may cause chemical pneumontis.
Ingestion Low toxicity on ingestion. Has laxative effect.
Carcinogenicity Not listed as a carcinogenic.

Emergency and First Aid Procedures

Eyes In case of contact, flush eyes with large amounts of water for at least 15 minutes. Get medical attention.
Skin Wash skin thoroughly with soap and water or waterless hand cleaner. If irritation occurs, get medical attention.
Inhalation If breathing is difficult, remove victim to fresh air, give artificial respiration if not breathing.
Ingestion Do not ingest. If ingested, do not induce vomiting. Get medical attention.

Preventative Measures

Ventilation Requirements Use explosion proof ventilation as required to control vapor concentration..
Respiratory Protection Not required under normal OSHA PEL. Use NIOSH approved respirators to prevent over-exposure.
Eye Protection Safety glasses with side shields or goggles.
Protective Gloves Nitrile gloves provide best protection to hands and arms.
Personal Hygiene Wear effective plant clothing. Contaminated clothing should be removed and washed in soap and water. Cleanse skin thoroughly before meals with soap and water. Shower and eyewash facilities should be accessible.
Note N/A

Environmental Procedures

Spills or Releases If material is spilled or released to the atmosphere, steps should be taken to prevent discharges to streams or sewer systems.  Spills or releases should be reported, if required to the appropriate local, state and federal regulatory agencies.
Disposal Clean up action should be carefully planned and executed. Shipment, storage and/or disposal of waste materials are regulated and action to handle or dispose of spilled or released materials must meet all state, local, and federal rules.
Storage Protect against physical damage. Separate from oxidizing materials. Store in cool well ventilated area of non-combustible construction away from possible sources of ignition.

Regulatory Information

Dept. of Transportation DOT Shipping Name:  NONE 
Hazard Class:  NONE 
ID Number:  NONE
TSCA All Components are Listed on EPA/TSCA Inventory.
CERCLA This product is classified as an oil under section 311.  Spills into or leading to surface water that cause sheen must be reported to the National Response Center at 1-800-424-8802.
RCRA If this product becomes a waste it would not be a hazardous waste by RCRA - 40  CFR 261.  Place in an appropriate disposal facility in compliance with local authorities.
SARA Title III - Section 302 Not Applicable
Section 311/312 Not Applicable
Section 313 Not Applicable

Preparation Date of Material Safety Data Sheet

Prepared By NOCO - Tom Scoda
Phone number of Preparer 1-800-229-6626
Date Prepared 07/18/2000
Revised Date 06/01/2008


Information presented herein has been compiled from information provided to us by our suppliers and other sources considered to be dependable and is accurate and reliable to the best of our knowledge. Nothing herein is to be construed as recommending any practice or the use of any product in violation of any patent or in violation of any law or regulation. It is the users' responsibility to determine the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. We make no warranty as to the results to be obtained in using any material and since conditions of use are not under our control, we must necessarily disclaim all liability with respect to the use of any material supplied by us.