Material Safety Data Sheet

NOCO GRIND 690


Material Identification and Use


Manufacturer's Name NOCO Energy Corp.
Manufacturer's Address 2440 Sheridan Dr., Tonawanda, NY 14150 (U.S. and Canada)
Emergency Phone Number 1-800-424-9300 (Chemtrec)
Supplier's Address P.O. Box 86, Tonawanda, NY  14151
Supplier Emergency Phone Number 1-800-500-6626
Product Name NOCO Grind 690
Product Code NOC0187
Chemical Name and Synonym Grinding Fluid
Product Use Metalworking Fluid

Ingredients


Components
CAS Number
%
Interchangeable Base Oil
Mixture
40 - 50
Interchangeable Base Oil
64741-89-5
40 - 50
Sulfurized Fatty Oil Easters
Proprietary
3 - 5
WHMIS Classification
Class D - Division 2B


Physical Data


Physical State Liquid
Odour and Appearance Very Dark Amber with mild Sulfur Odor
Specific Gravity 0.837
Vapor Pressure (MM HG @ 20° C) 0
Vapour Density Not Volatile
Evaporation Rate Not Determined
Boiling Point Not Determined
Freezing Point N/A
pH N/A
Solubility in H20 Negligible

Fire and Explosion Hazards


Conditions of Flammability Addition of water or foam may cause frothing. Do not cut, drill or weld empty containers.
Extinguishing Media Foam, Water Fog, Dry Chemical, Carbon Dioxide.
Flashpoint and Method of Determination 257°F  (125°C) ,  COC
Flammable Limits in Air % B. V. Upper Not Determined
Flammable Limits in Air % B. V. Lower Not Determined
NFPA - Hazard Class Health:1  Fire:1  Reactivity:0
Hazardous Combustion Products Oxides of Carbon, Sulfur and minor amounts of HCL and H2S
Unusual Fire an Explosion Hazard Container exposed to intense heat from fires should be cooled with water to prevent vapor pressure build up which could result in container rupture.  Container areas exposed to direct flame contact should be cooled with large quantities of water as needed to prevent weakening of container structure.
Special Fire Fighting Procedures Wear self contained breathing apparatus when fire fighting in a confined space. Cool fire exposed containers with water spray.

Reactivity Data


Chemical Stability Stable
Incompatible Materials Strong oxidizing agents:  Peroxides, Chlorine, Strong Acids, etc. 
Hazardous Decomposition Thermal decomposition may produce asphyxiates.
Hazardous Polymerization Material is not known to polymerize.

Health Hazard Information


Routes of Entry
Skin Contact Prolonged or repeated contact with skin may cause mild irritation and possibly dermatitis.
Eye Mildly irritating to eyes.
Inhalation If heated, sprayed or misted, may cause chemical pneumontis.
Ingestion Low toxicity on ingestion. Has laxative effect.
Carcinogenicity Not listed as a carcinogenic.

Emergency and First Aid Procedures


Eyes In case of contact, flush eyes with large amounts of water for at least 15 minutes. Get medical attention.
Skin Wash skin thoroughly with soap and water or waterless hand cleaner. If irritation occurs, get medical attention.
Inhalation If breathing is difficult, remove victim to fresh air, give artificial respiration if not breathing.
Ingestion Do not ingest. If ingested, do not induce vomiting. Get medical attention.

Preventative Measures


Ventilation Requirements Use explosion proof ventilation as required to control vapor concentration..
Respiratory Protection Not required under normal OSHA PEL. Use NIOSH approved respirators to prevent over-exposure.
Eye Protection Safety glasses with side shields or goggles.
Protective Gloves Nitrile gloves provide best protection to hands and arms.
Personal Hygiene Wear effective plant clothing. Contaminated clothing should be removed and washed in soap and water. Cleanse skin thoroughly before meals with soap and water. Shower and eyewash facilities should be accessible.
Note N/A

Environmental Procedures


Spills or Releases If material is spilled or released to the atmosphere, steps should be taken to prevent discharges to streams or sewer systems.  Spills or releases should be reported, if required to the appropriate local, state and federal regulatory agencies.
Disposal Clean up action should be carefully planned and executed. Shipment, storage and/or disposal of waste materials are regulated and action to handle or dispose of spilled or released materials must meet all state, local, and federal rules.
Storage Protect against physical damage. Separate from oxidizing materials. Store in cool well ventilated area of non-combustible construction away from possible sources of ignition.

Regulatory Information


Dept. of Transportation DOT Shipping Name:  NONE 
Hazard Class:  NONE 
ID Number:  NONE
TSCA All Components are Listed on EPA/TSCA Inventory.
CERCLA This product is classified as an oil under section 311.  Spills into or leading to surface water that cause sheen must be reported to the National Response Center at 1-800-424-8802.
RCRA If this product becomes a waste it would not be a hazardous waste by RCRA - 40  CFR 261.  Place in an appropriate disposal facility in compliance with local authorities.
SARA Title III - Section 302 Not Applicable
Section 311/312 Not Applicable
Section 313 This product does not contain any chemical in sufficient quantity to be subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.
Reportable Quantity N/A
Freight Classification Petroleum Lubricating Oil

Comments


If used in applications where a mist may be generated, observe a TWA/PEL of 5 mg/m3 for mineral oil mist (OSHA and ACGIH).

All components of this product are on the US TSCA Inventory and Canadian Domestic Substance List.

The additive manufacturers have declared the additive mixtures in this product a trade secret.



Preparation Date of Material Safety Data Sheet


Prepared By Tom Scoda (585) 924-4130
Phone number of Preparer 1-800-500-6626
Date Prepared 07/06/2000
Revised Date 06/01/2008

Disclaimer


We believe the statements, technical information and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for an loss, damage, or expense, direct or consequential, arising out of their use.