Material Safety Data Sheet


Material Identification and Use

Manufacturer's Name

NOCO Energy Corp.

Manufacturer's Address

2440 Sheridan Dr., Tonawanda, NY 14150 (U.S. and Canada)

Emergency Phone Number

1-800-424-9300 (Chemtrec)

Supplier's Address

P.O. Box 86, Tonawanda, NY  14151

Supplier Emergency Phone Number


Product Name


Product Code


Chemical Name and Synonym

Petroleum Hydrocarbon plus Additives

Product Use

Metalworking cutting fluid.

Chemical Ingredients

Product Components

CAS Number

% (Volume)

Hydrotreated heavy paraffinic distillate



Severely solvent refined light Paraffinic distillate



Proprietary Ingredients

3 - 5

WHMIS Classification: Not Controlled

Physical Data






Minimal, bland


Very Light, Pale Amber

Specific Gravity (water=1)


Boiling Point

> 315°C  (599°F)

Melting Point


Solubility in Water (by weight %)

0 at 20°C

Evaporation Rate

Not Determined

Vapor Pressure (mm Hg at 20° C)

< 0.1 

Vapor Density (air = 1)

Not Volatile

pH (as is)

Not Applicable


Product is stable under normal conditions

Fire and Explosion Hazards

Conditions of Flammability

Addition of water or foam may cause frothing. Do not cut, drill or weld empty containers.

Extinguishing Media

Foam, Water Fog, Dry Chemical, Carbon Dioxide. Closed containers exposed to fire may be cooled with water.

Flashpoint and Method of Determination

410°F  (210°C) ,  COC

Flammable Limits in Air % B. V. Upper

Not Determined

Flammable Limits in Air % B. V. Lower

Not Determined

NFPA - Hazard Class

Health:1 Fire:1  Reactivity:0

Hazardous Combustion Products

From Burning; carbon monoxide, carbon dioxide and oxides of phosphorous, nitrogen, and minor amounts of H2S.

Unusual Fire an Explosion Hazard

Do not cut, weld, braze, solder, drill, grind or expose containers, drums, tanks,etc. of product to heat, flame, sparks, static electricity or other sources of ignition; they may ignite explosively.

Special Fire Fighting Procedures

Wear self contained breathing apparatus when fire fighting in a confined space. Do not use water except as fog.

Reactivity Data

Chemical Stability

Stable under normal conditions.

Incompatible Materials

Keep away from strong oxidizing agents, such as, hydrogen peroxide, Bromine, chlorine and strong acids, etc.

Hazardous Decomposition

From burning oxides of carbon, sulfur, phosphates, and minor amounts of H2S. Keep away from heat and flames.

Hazardous Polymerization

Material is not known to polymerize.

Health Hazard Information

Routes of Entry

Skin Contact

Prolonged or repeated contact with skin may cause mild irritation and possibly dermatitis.


Mildly irritating to eyes.


If heated, sprayed or misted, may cause chemical pneumontis.


Low toxicity on ingestion. Has laxative effect.


Not listed as a carcinogenic.

Health Hazard Data

Permissible Concentrations (air): See COMMENTS section
Chronic effects of overexposure: no data available
Acute toxicological properties: no data available

Emergency and First Aid Procedures


In case of contact, flush eyes with large amounts of water for at least 15 minutes. Get medical attention.


Remove excess with cloth or paper. Wash skin thoroughly with soap and water or waterless hand cleaner. If irritation occurs, get medical attention.


If breathing is difficult, remove victim to fresh air, give artificial respiration if not breathing. Call a physician.


Do not ingest. If ingested, do not induce vomiting. Contact a physician immediately.

Preventative Measures

Ventilation Requirements

Use explosion proof ventilation as required to control vapor concentration. See COMMENTS section.

Respiratory Protection

If vapor concentration exceeds permissible exposure use NIOSH / MSHA certified respirator with dual organic vapor, mist and particulates cartridge.

Eye Protection

Safety glasses with side shields or goggles. (Chemical safety goggles)

Protective Gloves

Neoprene Type

Personal Hygiene

Wear effective plant clothing. Contaminated clothing should be removed and washed in soap and water. Cleanse skin thoroughly before meals with soap and water. Shower and eyewash facilities should be accessible.

Protective Equipment




Environmental Procedures

Spills or Releases

If material is spilled or released to the atmosphere, steps should be taken to prevent discharges to streams or sewer systems.  Transfer bulk of mixture into another container. Absorb residue with inert material such as earth, sand, or vermiculate. Sweep up and dispose as solid waste in accordance with local, state, and federal regulations. Spills or releases should be reported, if required to the appropriate local, state and federal regulatory agencies.


Clean up action should be carefully planned and executed. Shipment, storage and/or disposal of waste materials are regulated and action to handle or dispose of spilled or released materials must meet all state, local, and federal rules.


Protect against physical damage. Separate from oxidizing materials. Store in cool well ventilated area of non-combustible construction away from possible sources of ignition. Do not handle or store at temperatures over (maximum storage temperature) 60°C (140°F)

Regulatory Information

Dept. of Transportation

DOT Shipping Name:  NONE 
Hazard Class:  NONE 
ID Number:  NONE
Special Transportation Notes - NONE


All Components are Listed on EPA/TSCA Inventory.


This product is classified as an oil under section 311.  Spills into or leading to surface water that cause sheen must be reported to the National Response Center at 1-800-424-8802.


If this product becomes a waste it would not be a hazardous waste by RCRA - 40  CFR 261.  Place in an appropriate disposal facility in compliance with local authorities.

SARA Title III - Section 302

Not Applicable

Proprietary Additive

Recommend PEL 5mg/m3 (mist)

Section 311/312

Dermal irritant, acute and chronic health hazard.

Section 313

This product does not contain any chemical in sufficient quantity to be subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR part 372.

Reportable Quantity


Freight Classification

Petroleum Lubricating Oil


If used in applications where a mist may be generated, observe a TWA/PEL of 5 mg/m3 for mineral oil mist (OSHA and ACGIH).

All components of this product are on the US TSCA Inventory and Canadian Domestic Substance List.

The additive manufacturers have declared the additive mixtures in this product a trade secret.

Preparation Date of Material Safety Data Sheet

Prepared By

Tom Scoda (585) 924-4130

Phone number of Preparer


Date Prepared


Revised Date



We believe the statements, technical information and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for an loss, damage, or expense, direct or consequential, arising out of their use.