Material Safety Data Sheet

RUST STOP 293


Material Identification and Use


Manufacturer's Name NOCO Energy Corp.
Manufacturer's Address 2440 Sheridan Dr., Tonawanda, NY 14150 (U.S. and Canada)
Emergency Phone Number 1-800-424-9300 (Chemtrec)
Supplier's Address P.O. Box 86, Tonawanda, NY  14151
Supplier Emergency Phone Number 1-800-500-6626
Product Name Rust Stop 293
Product Code NOC1059
Chemical Name and Synonym Petroleum Hydrocarbon Plus Additive
Product Use Translucent film, solvent - cutback product for indoor protection only. Effective in protection of ferrous and non-ferrous metals from atmospheric corrosion even under conditions of high humidity. Excellent fingerprint remover and cleaning compound.

Chemical Ingredients


Product Components CAS Number
% (Volume)



Hydrotreated Light Distillate 64742-47-8
75 - 85
Stoddard Solvent 8052-41-3
10 - 20
Additives Mixture
5 - 10



WHMIS Classification B3, D2A

Physical Properties


Form Liquid
Appearance Low Viscosity Liquid
Odor Mild Petroleum
Color Amber
Specific Gravity (water=1) .7949
Boiling Point > 154°C  (310°F)
Melting Point < -63°C (-82°F)
Solubility in Water (by weight %) 0 at 20°C
Evaporation Rate (n butyl acetate = 1) .31
Vapor Pressure (mm Hg at 20° C) Not Available
Vapor Density (air = 1) Not Available
pH (as is) Not Applicable
Stability Product is stable under normal conditions

Fire and Explosion Hazards


Conditions of Flammability Addition of water or foam may cause frothing. Do not cut, drill or weld empty containers.
Extinguishing Media Foam, Water Fog, Dry Chemical, Carbon Dioxide. Closed containers exposed to fire may be cooled with water.
Flashpoint (Method Used) TAG closed cup > 57 °C  (135°F)
Flammable Limits in Air % B. V. Upper Not Determined
Flammable Limits in Air % B. V. Lower Not Determined
NFPA - Hazard Class Health:1  Fire:2  Reactivity:0
Hazardous Combustion Products From Burning; carbon monoxide, carbon dioxide and oxides of phosphorous.
Unusual Fire an Explosion Hazard Do not cut, weld, braze, solder, drill, grind or expose containers, drums, tanks,etc. of product to heat, flame, sparks, static electricity or other sources of ignition; they may ignite explosively.
Special Fire Fighting Procedures Wear self contained breathing apparatus when fire fighting in a confined space. Do not use water except as fog.

Reactivity Data


Chemical Stability Stable
Incompatible Materials Keep away from strong oxidizing agents, such as, hydrogen peroxide, Bromine, chlorine and chomic acid.
Hazardous Decomposition Carbon monoxide and carbon dioxide from burning.
Hazardous Polymerization Material is not known to polymerize.

Health Hazard Information


Routes of Entry Inhalation, skin/eye contact, ingestion.
Permissible concentrations (air) Stoddard solvent (CAS 8052-41-3): 500 ppm, 525 mg/m3 (OSHA/ACGIH)
  1,2,4 trimethylbenzene (CAS 95-63-6): 25 ppm, 125 mg/m3 (OSHA/ACGIH)

see COMMENTS section
Chronic effects of overexposure No data available
Acute toxicological properties For stoddard solvent: Inhalation-irritation of eyes, nose and throat, dizziness; skin contact-dermatitis; eyes-irritation; ingestion-nausea, vomiting. Large amounts, if retained, lead to symptoms of central nervous system depression.
Target Organ(s) Respiratory system, central nervous system, skin and eyes.
Medical Conditions Aggravated by Exposure Preexisting eye, skin, and respiratory disorders.

Emergency and First Aid Procedures


Eyes Immediately flush with large quantities of water for at least 15 minutes and call a physician.
Skin Remove excess with cloth or paper. Wash thoroughly with soap and water.
Inhalation Remove victim to fresh air. Call a physician.
If Swallowed Contact a physician immediately. DO NOT induce vomiting, (vomiting may cause aspiration into lungs resulting in chemical pneumonia).

Special Protection / Preventative Measures Information


Ventilation Requirements Use explosion proof ventilation as required to control vapor concentration. See COMMENTS section.
Respiratory Protection If vapor concentration exceeds permissible exposure use NIOSH / MSHA certified respirator with dual organic vapor, mist and particulates cartridge.
Eye Protection Safety glasses with side shields or goggles. (Chemical safety goggles)
Protective Gloves Neoprene Type
Personal Hygiene Wear effective plant clothing. Contaminated clothing should be removed and washed in soap and water. Cleanse skin thoroughly before meals with soap and water. Shower and eyewash facilities should be accessible.
Protective Equipment None
Note N/A

Environmental Procedures


Spills or Releases If material is spilled or released to the atmosphere, steps should be taken to prevent discharges to streams or sewer systems.  Transfer bulk of mixture into another container. Absorb residue with inert material such as earth, sand, or vermiculate. Sweep up and dispose as solid waste in accordance with local, state, and federal regulations. Spills or releases should be reported, if required to the appropriate local, state and federal regulatory agencies.
Disposal Clean up action should be carefully planned and executed. Shipment, storage and/or disposal of waste materials are regulated and action to handle or dispose of spilled or released materials must meet all state, local, and federal rules.
Storage Protect against physical damage. Separate from oxidizing materials. Store in cool well ventilated area of non-combustible construction away from possible sources of ignition. Do not handle or store at temperatures over (maximum storage temperature) 30°C (100°F)

Regulatory Information


Dept. of Transportation

DOT Shipping Name:  Petroleum Distillates, N.O.S.
Hazard Class:  Combustible Liquid 
ID Number:  UN 1268, PG III, ERG 128
Label(s) required:
--------------------------------------------------------------------

CAUTION! COMBUSTIBLE MIXTURE
Contains Stoddard Solvent-CAS No. 8052-41-3 and Hydrotreated Light Distillate CAS No. 6474

Use adequate ventilation to insure that fumes do not come in contact with sources of ignition such as flames or sparks. Avoid prolonged breathing of mist or vapors and prolonged or repeated skin contact. Use NIOSH/OSHA approved respirator, and chemical splash goggles to prevent eye contact.

EMERGENCY FIRST AID PROCEDURES
Eye Contact - Flush immediately with large amounts of water for at least 15 minutes. Call physician.
Skin Contact - Remove excess with cloth or paper. Wash thoroughly with soap and water.
Inhalation - Remove victim to fresh air. Call a physician. The OSHA permissible exposure limit for stoddard solvent is 500 ppm.
If Swallowed - Do not induce vomiting. call a physician immediately.

-------------------------------------------------------------------
Reportable Quantity: None
Freight Classification: Petroleum Distillates - Combustible Liquid
Special Transportation Notes: Unregulated by DOT when shipped in containers of less than 118.9 gallons.

Section 313 (Title III Superfund Amendment and Reauthorization Act) This product contains the following chemical(s) subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372 (the corresponding CAS number and the percent by weight are provided): 1,2,4 trimethylbenzene, CAS 95-63-6 @ 0.38%

Comments


If used in applications where a mist may be generated, observe a TWA/PEL of 5 mg/m3 for mineral oil mist (OSHA and ACGIH).

All components of this product are on the US TSCA Inventory and Canadian Domestic Substance List.

The additive manufacturers have declared the additive mixtures in this product a trade secret.

 
State Regulatory Information
Pennsylvania Worker and Community Right to Know Act: This product contains the following ingredients listed in Appendix A Hazardous Substance List:
 
Component CAS No.
stoddard solvent 8052-41-3
   
State of California Proposition 65: This product contains a chemical (or chemicals) known to the State of California to cause cancer, birth defects and/or other reproductive harm;
Naphthalene, CAS 91203, at 0.06% (Volume)


Preparation Date of Material Safety Data Sheet


Prepared By Tom Scoda (585) 924-4130
Phone number of Preparer 1-800-500-6626
Date Prepared 06/29/2000
Revised Date 05/22/2014

Disclaimer


We believe the statements, technical information and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for an loss, damage, or expense, direct or consequential, arising out of their use.